SC cable suspension
Hang it. Lock it. Move on.
Swaged wire-rope assemblies that replace threaded rod for suspended MEP services. Cut to length, terminated with the fitting the job needs, manufactured to order in our U.S. shop.
Devices
Sets and holds the length
The device is what the cable runs through. Pick it by what it hangs from and what it carries; the cable and its top fixing come separately.
Cable end fixings
Made up for the structure
Every assembly ships with its top end already swaged on. Pick the group by what you are fastening to.
Accessories
Ordered alongside any group
Install
Three moves per drop
- 01
Anchor
Set the fitting to structure: concrete, steel, wood, or deck.
- 02
Suspend
Drop the cable and thread the service. No rod to cut, no stock to carry at height.
- 03
Lock
Set the device and level. Adjustment is a squeeze, not a rethread.
ICC-ES Evaluated
Listing PMG-1840
Hangers for Pipe, Duct and Conduit Support. Evaluated to ICC-ES LC1041 and MSS SP-163-2025, effective September 2026, renewal due September 1, 2027. Rated loads are for the support assembly only, at a 4:1 factor of safety; attachment to structure is evaluated separately.
Listed devices: L23, DS23, S3, DC, SN25 / SN38. Listed end fixings: CPL, L, TGL, SNK, ST383, ST386, YASS18, YAST18, YACS, YACT. Other assemblies are outside the listing scope; their pages say so.
Send the spec. We’ll build the support.
Size, drop, and service. We’ll spec the part number and price the build.